Carrier 38MHRB series - DISASSEMBLY INSTRUCTIONS (CONT.); 24 K (208-230 V) Unit Electrical Parts Removal

68
DISASSEMBLY INSTRUCTIONS SIZES 24K (208−230V) (CONT)
3 Electrical
parts
How to remove the
electrical parts.
1) After completing the
work in sections 1 and
2, remove the
compressor connector.
2) Pull out the two blue
3) wires connected with
the four way valve.
4) Pull out connectors of
the condenser coil
temp. sensor (T3),
outdoor ambient temp.
sensor (T4) and
discharge temp.
sensor (T5).
ƻ
1
ƻ
2
ƻ
3