7
GB-21
2. INDOOR UNIT INSTALLATION
2.4.3.1 Fix the hook with tapping screw onto the wall.
2.4.3 Install the indoor unit
2.4.4 How to connect the pipes and wires
2.4.4.1 Push the two switches simultaneously, then open the panel.
2.4.4.2 Remove the string and take off the panel.
The unit must be installed vertically.
CAUTION
195mm
Hook
Tapping
screw
Washer
＜6mm
2.4.3.2 Hang the indoor unit on the hook.
There should be no gap between unit and
the ground.
No gap between unit and the ground
To Next Page
Loading...
