6
Fig. 2 - Dimensions, mm
38XTZ 011
Outdoor
air inlet
Outdoor air
discharge
Outdoor air
discharge
Outdoor
air inlet
Rear view
See view of
unit base
Suction line
connection 1-1/8"
Liquid line
connection 5/8"
Power supply
Left-hand side view
Main disconnect switch
Control box
Compressor
access panel
Front view
Refrigerant line
connections
Fan
Outdoor
air inlet
Outdoor
air inlet
Outdoor
air inlet
Com-
pressor
Control box
Outdoor air
discharge
Refrigerant-air heat exchanger
Refrigerant-air heat exchanger
Plan view
Note:
Rain water is drained through
the hole under the fan in the
base panel.
Profile view - unit base
4 anchor and fixing
holes ø 10 mm
4 lifting and transport
holes ø 17 mm
When designing an installation, always use up-to-date drawings, available from your local Carrier office.
Note:
The unit includes four anchor
holes in the base section.
To Next Page
Loading...
