40KQV
GB - 10
Electrical connections
CONTROL PANEL
mod. 050
CA
CLR
CV
C G
CP
B
CV
CP
CG
CA
CLR
B
CONTROL PANEL
mod. 080 - 110 - 130
Condenser
(under main terminal
board)
Ground connection screws
GMC board (inverter)
Outdoor unit connection
terminal board
Transformer
Holes for fixing panel in
position
Emergency push-button
Fan connector
LED/RECEIVER connector
Float connector
Pump connector
Louverconnector
CP
CG
CA
CV
CLR
B. Outdoor unit connection
SYSTEM CONFIGURATION
• Make the electrical connections between units prior to proceeding
to the main supply unit connection.
Ensure that the mains supply connection is made through a
switch that disconnects all poles, with a contact gap of a
least 3 mm.
Control panel can be reached by opening the grille and removing its
metal cover by 4 screws.
To Next Page
Loading...
