Carrier 40MHHA - Remote Control Operating Modes; HEAT Mode Operation; DRY Mode Operation; FAN Mode Operation

40MHHA: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
7
HEAT Mode
Fig. 5 — HEAT Mode
1. Press MODE to select the HEAT mode.
2. Set your desired temperature using TEMP  or TEMP .
3. Press FAN to select the fan speed in the range of AU-100%.
NOTE: As the outdoor temperature drops, the performance of your
unit’s HEAT function may be affected. In such instances, we
recommend using this air conditioner in conjunction with
other heating appliances.
AUTO Mode
In AUTO mode, the unit automatically selects the COOL, FAN, or
HEAT operation based on the set temperature.
Fig. 6 — AUTO Mode
1. Press MODE to select AUTO.
2. Set your desired temperature using TEMP  or TEMP .
3. Press ON/OFF to start the unit.
NOTE: FAN Speed can not be set in the AUTO mode.
DRY Mode
Fig. 7 — DRY Mode
1. Press MODE to select the DRY mode.
2. Set your desired temperature using TEMP  or TEMP .
3. Press ON/OFF to start the unit.
FAN Mode
Fig. 8 — FAN Mode
1. Press MODE to select the FAN mode.
2. Press FAN to select the fan speed in the range of AU-100%.
3. Press ON/OFF to start the unit.
1
3
2
4
Boost
1
3
2
4
Boost
Swing
Boost
Clean
1
3
2
Swing
Boost
Clean
1
3
2
Boost
Clean
1
3
2