1. Dimensions in ( ) are in millimeters.
2. Direction of airflow.
3. Refrigerant, drain, and power connections may be made in unit
rear, bottom, left side, or right side.
4. Refrigerant is metered by AccuRater™ device in the fan coil unit
on 38HDC, HDL and BK applications. A thermostatic expansion
valve is used in the outdoor unit on 38HDS applications. Insulate
both refrigerant lines on 38HDS and BK applications.
5. The 49 top and left side clearances are absolute minimums. Clear-
ances of 109 are recommended.
6. Do not insert a trap in condensate drain line. The drain is inter-
nally trapped.
Fig. 2 — 40QN Dimensional Drawing
UNIT
40QN
WEIGHT
018 39 Lb (17.5 Kg)
024 43 Lb (19.5 Kg)
3
To Next Page
Loading...
