No. Item Outline of specifications Remarks
8
Louver control: 1) Wireless remote controller
To set the airflow direction
1. FIX button
• The louver angle does not change immediately
after the FIX button is pushed. Check the louver
status, and push FIX button after a while.
• In subsequent operations, the vertical airflow
i automatically set in the direction to which you
adjusted the louver using the FIX button.
To automatically swing the airflow direction
Perform this function when the air conditioner is in
operation.
1. SWING button
Press the SWING button on the remote controller.
• To stop the function, press the SWING button.
2) Wired remote controller
How to set up the louver direction
1. Push during operation.
The louver direction changes for every push of the
button.
The swinging louver
moves usually up to
the ceiling side from
the louver position
of the set time.
Unit select
button
1
1
To Next Page
Loading...
