Carrier 42QG18-C - Table of Contents

TABLE OF CONTENTS
PAGE NO.
1. GENERAL NOTES TO INSTALLER 1
2. MODELS 2
3. OPERATING LIMITS 2
4. DIMENSIONS, WEIGHTS AND MINIMUM CLEARANCES 3
5. PRECAUTIONS BEFORE INSTALLATION 5
6. SPLIT SYSTEM DESCRIPTION 8
7. INSTALLTION ACCESSORIES 9
8. INSTALLATION CHART 11
9. SELECTING INSTALLATION LOCATION FOR INDOOR UNIT 12
10. SELECTING INSTALLATION LOCATION FOR OUTDOOR UNIT
10-1 INSTALLATION LOCATIONS 15
10-2 CONSIDERATIONS FOR SELECTING INSTALLATION LOCATIONS 15
11. INSTALLATION LOCATION – CHECK LIST 17
12. INDOOR UNIT INSTALLATION OF INDOOR UNITS
12.1 PREPARING UNIT BEFORE INSTALLATION 18
12.2 INSTALLATION STEPS 19
13. REMOTE CONTROL INSTALLATION 22
14. OUTDOOR UNIT INSTALLATION
14.1 PREPARING UNIT BEFORE INSTALLATION 23
14.2 INSTALLATION STEPS 23
15. CONNECTING REFRIGERANT PIPING LINES 24
16. CONNECTING CONDENSATE DRAIN LINE 35
17. CONNECTING ELECTRICAL WIRING 36
18. FINISHING INSTALLATION 40
19. TEST RUNNING 41
20. AIR CIRCULATION FOR INDOOR UNIT 42QG SERIES 43
21. AFTER INSTALLATION CHECK LIST 44
22. INSTALLATION OF OPTIONAL AIR FILTERS 46
23. SELF DIAGNOSTIC FUNCTION FOR MALFUNCTIONS DETECTION 47