Carrier 42QHF025 - Display Indicators; Mode Display; Transmission Indicator; Temp.;Timer Display

2. DISPLAY
NOTE:
1. Vertical swing, Ionizer, Smart eye, Silence
are not available for standard models;
2. Buttons design might be slightly different
from the actual one.
DISPLAY BUTTONS
0403
3. BUTTONS
TIMER ON OFF
SET TEMPERATURE
Transmission Indicator
Temp./Timer display
Fan speed display
Mode display
ON/OFF display
This transmission indicator will light when remote
controller transmits signals to the indoor unit.
Displays the selected mode.
AUTO, COOL, DRY, HEAT
The temperature setting (from 17 C/62 F to
30 C/88 F) or timer setting (0~24h) will be displayed.
If FAN mode is selected, there will be no display.
O O
O O
This indicator will be displayed when the unit is
operating.
Displays the selected fan speed: AUTO, HIGH,
when the fan
speed is selected in AUTO speed. When AUTO or
DRY Mode is selected, there will be no signal
displayed.
MED and LOW. Nothing displays
This display area shows the settings of the TIMER.
That is, if only the Auto-on time function is set, it will
display TIMER ON. If only the Auto-off time function
is
set, it will display TIMER OFF. If both functions are
set, it will display TIMER ON OFF.
Mode display(FAN mode)
FOLLOW ME display
When pressing FOLLOW ME button in COOL or
HEAT mode, the remote sensing function is activated
and this indicator displays.
TIMER display
1
2
Press the mode button repeatedly to change
operation mode
3
MODE Button ( )
4
ON/OFF Button ( )
Operation starts when this button is pressed
and stops when this button is pressed again.
AUTO COOL DRY
HEAT
FAN
SWING Button ( )
SWING Button ( )
The horizontal louver will move an angle of
6 degree for each press. If keep pushing more
than 2 seconds, the louver will swing up and
down automatically.
The vertical louver will move an angle of 6
degree for each press. And the temperature
display area of indoor unit displays for
one second. If keep pushing more than 2
seconds, the vertical louver swing feature is
activated. And the indoor unit displays ,
flash four times, then the temperature set
ting
reverts back. If the vertical louver swing feature
is stopped, it displays LC and remains on
for 3 seconds.
IIII
,
,
,
,
,
,
Press this button to decrease the setting
temperature
Press this button to increase the setting
temperature
UP Button( )
DOWN Button( )
NOTE
：
HEAT mode will not be activated for
cooling only models
1
2 7
8
9
10
11
3
4
5
6