Carrier 42QTD018DS Series - 3 Outdoor Unit Installation; Select the Installation Site; Outdoor Unit Mounting Dimensions; Space Requirements for Outdoor Unit

7
GB-23
3. OUTDOOR UNIT INSTALLATION
3.2 INSTALLATION SITE CHOOSING
■ Where it is out of rain or direct sunlight.
■ Where it is well-ventilated and free from obstacles near the air inlet and air outlet.
■ Where does not increase the operating noise or vibration of the outdoor unit.
■ Where does not cause any drainage problem with discharged water.
■ Install the outdoor unit properly at a place that is durable enough to the weight of the outdoor unit.
■ Where provides appropriate clearances as outlined
■ Where the piping between the indoor and outdoor units is within the allowable limits.
■ In regions with snowfall and cold temperatures, avoid installing the outdoor unit in areas where it can be covered by
snow. If heavy snow is expected, a field supplied ice or stand and field supplied-installed wind baffle should be
installed to protect the unit from snow accumulation and blocked air intake.
■ When installing the outdoor unit in a place that is
constantly exposed to a strong wind, it is recommended
that a wind baffle be used.
X
O
Strong wind
3.3 OUTDOOR UNIT MOUNTING DIMENSION
W
H
B
A
D
Outline dimension
900 860 315 333
W H D A B
990 965 345 366
27
36
845 700 320 335
18
590
624
560
Model
The following accessories are supplied with the outdoor unit. The type and quantity may differ depending on the specifications.
3.1 ACCESSORIES
1
1
Name of Accessories
Manual
Q‘ty(pc)
Shape
Use
1
<Installation manual>
Drain outlet
Connect drainage hose for outdoor unit.
Gasket
Seal the drainage outlet for outdoor unit.