Selecting the airflow direction
(Key H)
The deflector direction must be set so as to
optimize the ambient airflow distribution.
Press the button until one of the following
positions is displayed:
Icons appearing on the display
The airflow direction is adjusted
automatically. The deflector will
remain in the pre-selected position,
according to the operating mode.
6 different airflow directions
may be selected.
The deflector will continue to swing
downwards and upwards. The
“Swing” option guarantees an
effective and uniform distribution of
ambient air at all times.
NOTE
In COOLING, DE-HUMIDIFICATION and
VENTILATION modes, the deflector
swings to the COOLING option.
Selecting the fan speed
(Key E)
The fan speed can be selected by pressing
the button with the icon
Indicated symbol
Low speed
(for night operation)
Medium speed
High speed (from when the unit
is turned on until the desired
temperature is reached)
Automatic (the fan speed
changes automatically to the
value providing the best possible
comfort)
Programming the Timer
to start (ON)
1. Timer ON button (Button I)
Press this button even if the remote
control is turned off. The relevant icon
and the picture of the clock start flashing.
If you do not press a button for 10
seconds, the remote control switches
itself off (it was already switched off
when the button was pressed), or the
timer function is automatically
deactivated.
12
Cooling with dehumidification
To Next Page
Loading...
