Carrier 48/50HC04---14 - Page 31

31
APPENDIX A -- USER INTERFACE MENUS (CON’T)
Configuration Menus (con’t)
BACview MENU POINT NAME
BACnet
OBJECT
RANGE DEFAULT FIELD ASSISTANT MENU
HOME Select function below Properties/Equipment
UNIT
UNIT CONFIGURA TION
Unit Configuration
Fan Mode fan_mode 1=Auto
2=Continu-
ous
3=Always
On
Continuous
Unit Start Delay start_delay 0 --- 3 0 se c 5
Fan Off Delay fan_delay_off 0 --- 1 8 0 se c 90
Minimum Cooling SAT sat_cl_min 45 ---75 ° F 50
Maximum Heating SA T sat_ht_max 95 ---150° F 120
Vent Dmpr Pos / DCV Min Pos econ_min 0 --- 1 0 0
%Open
20
DCV Max Vent Damper Pos iaq_dpr_max 10---60
%Open
50
S Fan Service Alarm Timer sfan_service_hrs 0---9999 hr 0
Comp 1 Service Alarm Timer comp1_ser-
vice_hrs
0---9999 hr 0
Comp 2 Service Alarm Timer comp2_ser-
vice_hrs
0---9999 hr 0
Filter Service Alarm Timer filter_service_hrs 0---9999 hr 600
Pushbutton Override pb_enable Disable/En-
able
Enable
Setpoint Adjustment stpt_adj_enable Disable/En-
able
Enable
Setpoint Adjustment Range stpt_adj_range + / --- 0 --- 5
°F
5
Coolin g Lockout Temperature oat_cl_lockout 0 --- 8 0 ° F 45
Economizer High OAT Lockout
Temp
oat_ec_lockout 55---80° F 75
HP Rev C y cle Lockout Temp hp_rev_cycle_loc
kout
--- 2 0 --- 3 0 ° F --- 3
Heating Lockout Temperature oat_ht_lockout 35---150° F 65
Unocc Free Cool Enable ntfc_ena Disable/En-
able
Disable
Setpoint Separation min_stpt_sep 2 --- 1 0 ° F 5
Occupancy Source occ_source 1=Always
occupied
2=BACn et
Schedule
3=BAS On/
Off
4=Remote
Occ Input
Always Occupied
CALIBRATE
SENSOR CALIBRATION
Space Temperature lcl_space_temp
Space Temp Calibration spt_offset --- 9 . 9 --- 1 0 ° F 0
Supply Air Temperature lcl_sa_temp
Supply Air Temp Calibration sat_offset --- 9 . 9 --- 1 0 ° F 0
Outdoor Air Temperature lc_oa_temp
Outdoor Air Temp Calibration oat_offset --- 9 . 9 --- 1 0 ° F 0