35
APPENDIX A -- USER INTERFACE MENUS (CON’T)
Alarm Menus
BACview MENU POINT NAME BACnet OBJECT RANGE
FIELD ASSISTANT
MENU
HOME Select function below Properties/Equipment
ALARM CURRENT ALARMS Alarms
Safety Chain safety_alarm Normal/Alarm
Fire Shutdown fire_alarm Normal/Alarm
Supply Fan Failure sfan_fail_alarm Normal/Alarm
Supply Fan in Hand sfan_hand _alarm Normal/Alarm
Compressor Safety comp_alarm Normal/Alarm
Space Temp Sensor spt_fail Normal/Alarm
Supply Air Temp Sensor sat_alarm Normal/Alarm
Outdoor Air Temp Sensor Alarm oat_alarm Normal/Alarm
Space Relative Humidity Sensor sprh_alarm Normal/Alarm
IAQ Sensor iaq_alarm Normal/Alarm
OAQ Sensor oaq_alarm Normal/Alarm
Space Temperature spt_alrm_status Normal/Alarm
Alarming Temperature spt_alrm_temp xxx ° F
Alarm Limit Exceeded spt_alrm_lmt xxx ° F
High Supply Air Temperature sat_hi_alarm Normal/Alarm
Low Supply Air Temperature sat_lo_alarm Normal/Alarm
Setpoint Slider slidepot_alarm Normal/Alarm
Switch Configuration di_cfg_alarm Normal/Alarm
Analog Input Configuration ai_cfg_alarm Normal/Alarm
High Space Relative Humidity sprh_hi_alarm Normal/Alarm
Low Space Relative Humidity sprh_lo_alarm Normal/Alarm
High C O2 co2_alarm Normal/Alarm
Supply Fan Runtime sfan_rntm_alarm Normal/Alarm
Compressor 1 Runtime comp1_rntm_alarm Normal/Alarm
Compressor 2 Runtime comp2_rntm_alarm Normal/Alarm
Filter filter_alarm Clean/Dirty
Airside Linkage Alarm air_linkage_fail Normal/Alarm
Alarm Module Event History (100 most recent) (BACview only)
Active Alarms Buffer
Active Faults Buffer
R e t u r n e d --- To --- N o r m a l ( R T N ) Buffer
Manually Cleared (CLR) Buffer
To Next Page
Loading...
