38
LED error c ode c an be observed through the viewport.
During servicing refer to the label on the control box
cover or Table 13 for an explanation of L ED error code
descriptions.
If lockout occurs, unit may be reset by interrupt ing power
supply to unit for at least 5 seconds.
72,000 BTUH INPUT AND 60,000 BTUH INPUT
115,000 BTUH INPUT,
150,000 BTUH INPUT,
90,000BTUH INPUT AND
120,000 BTUH INPUT
LOW HEAT
MEDIUM AND HIGH HEAT
C06154
Fig. 53 -- Spark Adjustment (Siz e 04--07)
48HC
To Next Page
Loading...
