51
Download Application Parameters —
To download application parameters only to the control
panel from the VFD, perform the following procedure:
1. Install the control panel with the correct parameters
onto the VFD.
2. Select MENU (SOFT KEY 2). The Main menu will
be displayed.
3. Use the UP or DOWN keys to highlight PAR
BACKUP on the display screen and press ENTER
(SOFT KEY 2).
4. Use the UP or DOWN keys to highlight DOWNLOAD
APPLICATION and press SEL (SOFT KEY 2).
5. The text “Downloading Parameters (partial)” will be
displayed with a progress indicator. To stop the pro-
cess, select ABORT (SOFT KEY 1).
6. When the download is complete, the text “Parameter
download successful” will be displayed.
7. The display will then return to the PAR BACKUP
menu. Select EXIT (SOFT KEY 1) to return to the
main menu.
8. The control panel can now be disconnected from the
drive.
Clock Set Mode
The clock set mode is used for setting the date and time
for the internal clock of the VFD. In order to use the timer
functions of the VFD control, the internal clock must be
set. The date is used to determine weekdays and is visible
in the fault logs.
To set the clock, perform the following procedure:
1. Select MENU (SOFT KEY 2). The Main menu will
be displayed.
2. Use the UP or DOWN keys to highlight CLOCK SET
on the display screen and press ENTER (SOFT KEY
2). The clock set parameter list will be displayed.
3. Use the UP or DOWN keys to highlight CLOCK VIS-
IBILITY and press SEL (SOFT KEY 2). This para-
meter is used to display or hide the clock on the
screen. Use the UP or DOWN keys to change the
parameter setting. Press OK (SOFT KEY 2) to save
the configuration and return to the Clock Set menu.
4. Use the UP or DOWN keys to highlight SET TIME
and press SEL (SOFT KEY 2). Use the UP or DOWN
keys to change the hours and minutes. Press OK
(SOFT KEY 2) to save the configuration and return to
the Clock Set menu.
5. Use the UP or DOWN keys to highlight TIME
FORMAT and press SEL (SOFT KEY 2). Use the UP
or DOWN keys to change the parameter setting. Press
OK (SOFT KEY 2) to save the configuration and re-
turn to the Clock Set menu.
6. Use the UP or DOWN keys to highlight SET DATE
and press SEL (SOFT KEY 2). Use the UP or DOWN
keys to change the day, month, and year. Press OK
(SOFT KEY 2) to save the configuration and return to
the Clock Set menu.
7. Use the UP or DOWN keys to highlight DATE
FORMAT and press SEL (SOFT KEY 2). Use the UP
or DOWN keys to change the parameter setting. Press
OK (SOFT KEY 2) to save the configuration and re-
turn to the Clock Set menu.
8. Press EXIT (SOFT KEY 1) twice to return to the
main menu.
I/O Settings Mode
The I/O Settings mode is used for viewing and editing the
I/O settings.
To configure the I/O settings, perform the following
procedure:
1. Select MENU (SOFT KEY 2). The Main menu will
be displayed.
2. Use the UP or DOWN keys to highlight I/O SET-
TINGS on the display screen and press ENTER
(SOFT KEY 2). The I/O Settings parameter list will
be displayed.
3. Use the UP or DOWN keys to highlight the desired
I/O setting and press SEL (SOFT KEY 2).
4. Use the UP or DOWN keys to select the parameter to
view. Press OK (SOFT KEY 2).
5. Use the UP or DOWN keys to change the parameter
setting. Press SAVE (SOFT KEY 2) to save the con-
figuration. Press CANCEL (SOFT KEY 1) to keep
the previous value. Any modifications that are not
saved will not be changed.
6. Press EXIT (SOFT KEY 1) twice to return to the
main menu.
48LC
To Next Page
Loading...
