11 - TECHNICAL SPECIFICATIONS
11.2.8 - Optional control elements
- Raised oor management
This option helps maintain a constant pressure in the suspended ceiling by adapting the fan speed.
• Characteristics of the CP112 AN pressure sensor
Composition: This option comprises a sensor
Dimensions of the housing
(with mounting support)
Connectors
Inside the front cover Mobile front panel Rear xed housing
Right-hand
switch
Pressure connections
Solenoid valve
(CP111 only)
Supply terminal
block
Packing box
Output
terminal block
LCC-S
connection
Autozero
Left-hand
switch
Electrical connections (as per NFC15-100 standards)
See wiring diagram for connection
Autozero
To perform an Autozero, disconnect the tubes from the 2 pressure connections and press the "Autozero" button.
When an Autozero is performed, the green "On" indicator light goes out then comes on again.
21
To Next Page
Loading...
