Carrier 50FC - Heat Recovery Coil Installation

35
13 - LIST OF CONTROL PARAMETERS WITH "ACCESS LEVEL 1"
Parameters of “Clock/Scheduler” (...continuation)
Screen Parameter Description of the parameter Value Min. Max. UOM Type R/W
Add.
BMS
PH13a Scheduler_1.VacationsSched[0].EndMonth Last month of the period 0 1 12 --- Integer R/W
PH13a Scheduler_1.VacationsSched[0].UnitStatus
Unit status during the holiday period (0=OFF; 1=PROTECTION;
2=ECONOMY; 3=COMFORT)
0 0 3 --- Integer R/W
PH13a Scheduler_1.VacationsSched[1].Enabled Leave period 0 0 1 --- Digital R/W
PH13a Scheduler_1.VacationsSched[1].StartDay First day of the period 0 1 31 --- Integer R/W
PH13a Scheduler_1.VacationsSched[1].StartMonth First month of the period 0 1 12 --- Integer R/W
PH13a Scheduler_1.VacationsSched[1].EndDay Last day of the period 0 1 31 --- Integer R/W
PH13a Scheduler_1.VacationsSched[1].EndMonth Last month of the period 0 1 12 --- Integer R/W
PH13a Scheduler_1.VacationsSched[1].UnitStatus
Unit status during the holiday period (0=OFF; 1=PROTECTION;
2=ECONOMY; 3=COMFORT)
0 0 3 --- Integer R/W
PH13a Scheduler_1.VacationsSched[2].Enabled Leave period 0 0 1 --- Digital R/W
PH13a Scheduler_1.VacationsSched[2].StartDay First day of the period 0 1 31 --- Integer R/W
PH13a Scheduler_1.VacationsSched[2].StartMonth First month of the period 0 1 12 --- Integer R/W
PH13a Scheduler_1.VacationsSched[2].EndDay Last day of the period 0 1 31 --- Integer R/W
PH13a Scheduler_1.VacationsSched[2].EndMonth Last month of the period 0 1 12 --- Integer R/W
PH13a Scheduler_1.VacationsSched[2].UnitStatus
Unit status during the holiday period (0=OFF; 1=PROTECTION;
2=ECONOMY; 3=COMFORT)
0 0 3 --- Integer R/W
PH13a Scheduler_1.VacationsMsg Messages to be displayed for holiday periods 0 0 9 --- Integer R
PH13b Scheduler_1.SpecDaysSched[0].Enabled Special day enabled 0 0 1 --- Digital R/W
PH13b Scheduler_1.SpecDaysSched[0].SpecialDay Special day 0 1 31 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[0].SpecialMonth Special month 0 1 12 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[0].UnitStatus
Unit status on special day (0=OFF; 1=PROTECTION;
2=ECONOMY; 3=COMFORT; 4=AUTO)
0 0 4 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[1].Enabled Special day enabled 0 0 1 --- Digital R/W
PH13b Scheduler_1.SpecDaysSched[1].SpecialDay Special day 0 1 31 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[1].SpecialMonth Special month 0 1 12 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[1].UnitStatus
Unit status on special day (0=OFF; 1=PROTECTION;
2=ECONOMY; 3=COMFORT; 4=AUTO)
0 0 4 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[2].Enabled Special day enabled 0 0 1 --- Digital R/W
PH13b Scheduler_1.SpecDaysSched[2].SpecialDay Special day 0 1 31 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[2].SpecialMonth Special month 0 1 12 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[2].UnitStatus
Unit status on special day (0=OFF; 1=PROTECTION;
2=ECONOMY; 3=COMFORT; 4=AUTO)
0 0 4 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[3].Enabled Special day enabled 0 0 1 --- Digital R/W
PH13b Scheduler_1.SpecDaysSched[3].SpecialDay Special day 0 1 31 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[3].SpecialMonth Special month 0 1 12 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[3].UnitStatus
Unit status on special day (0=OFF; 1=PROTECTION;
2=ECONOMY; 3=COMFORT; 4=AUTO)
0 0 4 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[4].Enabled Special day enabled 0 0 1 --- Digital R/W
PH13b Scheduler_1.SpecDaysSched[4].SpecialDay Special day 0 1 31 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[4].SpecialMonth Special month 0 1 12 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[4].UnitStatus
Unit status on special day (0=OFF; 1=PROTECTION;
2=ECONOMY; 3=COMFORT; 4=AUTO)
0 0 4 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[5].Enabled Special day enabled 0 0 1 --- Digital R/W
PH13b Scheduler_1.SpecDaysSched[5].SpecialDay Special day 0 1 31 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[5].SpecialMonth Special month 0 1 12 --- Integer R/W
PH13b Scheduler_1.SpecDaysSched[5].UnitStatus
Unit status on special day (0=OFF; 1=PROTECTION;
2=ECONOMY; 3=COMFORT; 4=AUTO)
0 0 4 --- Integer R/W
PH13b Scheduler_1.SpecDaysMsg Messages to be displayed for special days 0 0 9 --- Integer R
PH14 SET_INT_FRIO Setpoint for COMFORT time slots in summer 26.0 -99.9 99.9 °C Analog. R/W 61
PH14 SET_EXT_FRIO Setpoint for ECONOMY time slots in summer 28.0 -99.9 99.9 °C Analog. R/W 59
PH14 SET_EXT_LIM_FRIO Setpoint for BUILDING PROTECTION time slots in summer 34.0 -99.9 99.9 °C Analog. R/W 77
PH14 DIF_LIM_FRIO Di󰀨 erential for setpoint of BUILDING PROTECTION in summer 2.0 0.0 99.9 °C Analog. R/W 80
PH15 SET_INT_CALOR Setpoint for COMFORT time slots in winter 21.0 -99.9 99.9 °C Analog. R/W 60
PH15 SET_EXT_CALOR Setpoint for ECONOMY time slots in winter 19.0 -99.9 99.9 °C Analog. R/W 58
PH15 SET_EXT_LIM_CALOR Setpoint for BUILDING PROTECTION time slots in winter 13.0 -99.9 99.9 °C Analog. R/W 76
PH15 DIF_LIM_CALOR Di󰀨 erential for the setpoint of BUILDING PROTECTION in winter 1.0 0.0 99.9 °C Analog. R/W 81
PH16 ThTune_clock_hours Display of data from the User terminal: hour 0 0 99 --- Integer R
PH16 ThTune_clock_minutes Display of data from the User terminal: minutes 0 0 99 --- Integer R
PH16 NEW_DAY Display of data from the User terminal: day 0 0 31 --- Integer R/W 121
PH16 NEW_MONTH Display of data from the User terminal: month 0 0 12 --- Integer R/W 122
PH16 NEW_YEAR Display of data from the User terminal: year 0 0 99 --- Integer R/W 123
PH16 ThTune_clock_weekday Display of data from the User terminal: weekday 0 1 7 --- Integer R
PH17 HAB_PROG_HORARIA_CLOCK_KEY Display of data from the User terminal: ON/OFF schedule prog. 0 0 1 --- Digital R
PH17 ThTune_Temperature_setpoint Display of data from the User terminal: temperature setpoint 0.0 0.0 99.9 --- Analog. R/W
PH17 Current_Timeband_Icon Display of data from the User terminal: current band of scheduling 0 0 6 --- Integer R/W
SCHEDULE
L