50
15 - TECHNICAL AND ELECTRICAL CHARACTERISTICS
Graphic terminal
TECHNICAL CHARACTERISTICS OF THE DISPLAY
Type FSTN graphic
Back-lighting Blue LED (controlled using software)
Resolution 132 x 64 pixel
TECHNICAL CHARACTERISTICS OF THE POWER SUPPLY
Voltage
Power supply through the telephone cable or external source 18/30 Vdc protected
by an external 250 mAT fuse
Maximum power input 1.2 W
CONNECTION WITH THE microPC BOARD
Type asynchronous half duplex, 2 dedicated wires
Connector for the terminal 6-way telephone plug
Driver CMR 7 V (type RS485) balanced di erential
GENERAL CHARACTERISTICS
Protection index IP65 for assembly in panel / IP40 for wall assembly
UL type 1
Operating conditions -20T60 ºC, 90% RH non-condensing
Storage conditions -20T70 ºC, 90% RH non-condensing
Software class and structure A
Classifi cation according to protection against electric shocks To be incorporated in class I or II appliances
PTI of the insulating material 250V
Dimensions: Length x Height x Depth 156 x 82 x 31 mm
User terminal
TECHNICAL CHARACTERISTICS OF THE POWER SUPPLY
Voltage Power supply 230Vac(+10/-15) 50/60Hz
Maximum power 1 VA
CONNECTION WITH THE microPC BOARD
Type AGW20 or AGW22 with 1 braided pair + drainwire + shielding
GENERAL CHARACTERISTICS
Protection index IP20
Operating conditions -10T60 ºC, 10 to 90% RH non-condensing
Storage conditions -20T70 ºC, 10 to 90% RH non-condensing
Software class and structure A
Environmental pollution 2
Category of resistance to heat and fi re Category D
Immunity from voltage surge Category 2
Classifi cation according to protection against electric shocks To be incorporated in class I and/or II appliances
Electric safety IEC EN 60730-1, IEC EN 60730-2-9
Electromagnetic compatibility IEC EN 61000-6-1, IEC 61000-6-3, IEC EN 61000-6-2, IEC EN 61000-6-4
PTI of the insulating material 275 V
Precision of the temperature measurement 0T40 ºC ± 1%
Dimensions: Length x Height x Depth
Model to fi t: 86 x 86 x 51 mm
Surface model: 86 x 142 x 23 mm or 142 x 86 x 23 mm
To Next Page
Loading...
