Carrier 50HJ015 - Page 3

EVAPORATOR- EVAPORATOR-
FAN MOTOR FAN MOTOR
Fig. 2 - Horizontal Supply/Return Curb Details
DIMENSION A
UNIT 50HJ
Ft-in. mm
015
3-0 914
024
3-4 Vfe
1029
NOTES:
1. Dimensions in ( ) are in millimeters
2 Refer to Table 1 for unit operating weights.
3. Remove boards at ends of unit and runners prior to rigging.
4 Rig by inserting hooks into unit base rails as shown. Use corner
post from packaging to protect coil from damage. Use bumper
boards for spreader bars.
5 Weights do not include optional economizer See Table 1 for econo¬
mizer weight.
6. Weights given are for aluminum evaporator coil plate fins and
copper condenser coil plate fins Weights of other metal combi¬
nations are listed in Table 1
A CAUTION
All panels must be in place when rigging.
Fig. 3 - Rigging Details
3