Carrier 50HJ015 - Page 9

COOLING
LOCKOUT
SWITCH
ECONOMIZER
MOTOR
ECONOMIZER'
CONTROL
MODULE
FILTERS
ECONOMIZER
damper
assembly
Fig. 13 - Economizer Damper Assembly - End View
LED — Light-Emitting Diode
Fig. 14 — Economizer Control Module
Fig. 15 - Economizer Control Module Location
6 Match notches in hood top panel to unit top panel screws
Insert hood flange between unit top panel flange and unit.
Tighten screws.
7 Insert outdoor-air inlet screens and spacer in channel cre¬
ated by lower filter retainer and filter support biacket.
8. Attach remaining shorter section section of filter sup-
Fig. 18 — Outdoor-Air Hood Details
9