NOTE: For preassembled horizontal adapter roof curb part
no. 50DP900211, the accessory kit includes a factory-designed, high-
static, regain transition duct. For horizontal curb part no. 50PQ900151,
a field-supplied transition duct is required.
Fig. 2 — Horizontal Adapter Roof Curb and Roof Curb
UNIT
50TJ
MAXIMUM
SHIPPING WEIGHT
DIMENSIONS
AB
lb kg ft-in. mm ft-in. mm
016 1550 703 6-11
1
⁄
2
2121 4- 0 1219
020 1650 748 6-11
1
⁄
2
2121 3-10 1168
024 1700 771 6-11
1
⁄
2
2121 3- 7 1092
028 1850 839 6-11
1
⁄
2
2121 3- 5 1041
NOTES:
1. Dimensions in ( ) are in millimeters.
2. Refer to Fig. 4 and 5 for unit operating weights.
3. Remove boards at ends of unit and runners prior to rigging.
4. Rig by inserting hooks into unit base rails as shown. Use corner
post from packaging to protect coil from damage. Use bumper boards
for spreader bars.
5. Weights do not include optional economizer. See Fig. 4 and 5 for
economizer weight.
6. Weights given are for aluminum evaporator and condenser coil
plate fins.
All panels must be in place when rigging.
Fig. 3 — Rigging Details
3
To Next Page
Loading...
