[24
CON)
COIL_
!1,57 _ !6,06
[294,0] [408,0]
REAR VIEW
\
\_ !4,0 DIA,
[356,0]
DUCTOPENINGS
EVAP
CO I L_\\
\
f
50,98
[!295,0]
BOTTOMOF UNIT
\\
\\\
\\
x\
II
REQUIRED CLEARANCE TO COMBUSTIBLE M_L
INCHES [mm]
TOP OF UNIT ...................................................................................... 0
DUCT SIDE OF UNIT ............................................................................. 0
SIDE OPPOSITE DUCTS ...................................................................... 0
BOTTOM OF UNIT ................................................................................. 0
NEC. REQUIRED CLEARANCES.
INCHES [mm]
BETWEEN UNITS, POWER ENTRY SIDE ................................. 42.00 [1066.8]
UNIT AND UNGROUNDED SURFACES, POWER ENTRY SIDE ,36.00 [9! 4.0]
UNIT AND BLOCK OR CONCRETE WALLS AND OTHER
GROUNDED SURFACES, POWER ENTRY SIDE ......................... 42,00 [!066.8]
REQUIRED CLEARANCE FOR OPERATION AND SERVICING
INCHES [mm]
CONDENSER COIL ACCESS SIDE .............................................. 30.00 [762.0]
POWER ENTRY SIDE .................................................................... 30,00 [762.0]
[EXCEPT FOR NEC REQUIREMENTS)
UNIT TOP ....................................................................................... 48.00 [1219.2]
SIDE OPPOSITE DUCTS .............................................................. 30.00 [762.0]
LEGEND
NED National Electrical Code
NOTES:
1. Clearances must be maintained to prevent recirculation of air from outdoor-
fan discharge with the exception of the condenser coil (36.00 in [914.0 ram], A
removable fence or barricade requires no clearance.
2. Dimensions are in inches, Dimensions in [ ] are in millimeters,
[812,5]
BOTTObOf UNIT
BLO_S_ER, (IONFROL BOX AND EVAP COIL
ACCESS PANEL
n o rh o
LEFT SIDE VIEW
FRONT VIEW
1.20
[30.6]
1.0540 I.D. x .50 DEE_
[26.772] x 12.7 DEEP
RIGHT SIDE VIEW
Fig. 2 - Base Unit Dimensions, 50ZH024-036
2.50
"[63.51
C00156
UNIT
50ZH024
50ZH030
ELECTRICAL CHARACTERISTICS
208/230 - 1-60
208/230 - 1-60
UNIT WEIGHT
Ib kg
218 99
245 111
CENTER OF GRAVITY IN, (MM)
X Y Z
14.0 19.0 12.0
(356) (483) (305)
14.0 19.0 12.0
(356) (483) (305)
To Next Page
Loading...
