8
A97621
320325-101 REV. G (LIT)
MINIMUM INCHES CLEARANCE TO COMBUSTIBLE CONSTRUCTION
This forced air furnace is
equipped for use with
natural gas at altitudes
0 - 10,000 ft (0-3,050m).
An accessory kit,
supplied by the
manufacturer, shall be used
to convert to propane gas
use or may be required for
some natural gas
applications.
This furnace is for indoor
installation in
a building constructed on
site.
This furnace may be
installed on combustible
flooring in alcove or closet
at minimum clearance from
combustible material.
This furnace may be used
with a Type B-1 Vent and
may be vented in common
with other gas-fired
appliances.
Clearance in inches.
BOTTOM
0"
##
1" #
0"
1"
1"
30"
MIN
S
I
D
E
F
R
O
N
T
B
C
K
A
S
E
R
V
I
E
C
F
R
O
N
T
S
I
E
U
F
R
N
A
C
E
#
TOP / PLENUM
D
For furnaces wider than
14.25 inches (362mm)
may be 0 inches.
For single wall vent
type 6 inches. For Type
B-1 vent type 3 inches.
#
##
Vent Clearance to combustibles:
For Single Wall vents 6 inches (6 po).
For Type B-1 vent type 1 inch (1 po).
This furnace is approved for UPFLOW installations only.
®
ama
CANADIAN GAS ASSOCIATION
APPROVED
R
MEETS DOE RESIDENTIAL CONSERVATION
SERVICES PROGRAM STANDARDS.
Before purchasing this appliance, read important
energy cost and efficiency information available
from your retailer.
To Next Page
Loading...
