59SU5A: Installation, Start-up, Operating and Service Maintenance Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
12
A200071
Fig. 10 – Example of Field Drain Attachment (Not Allowed)
A200072
A200073
A200074
NOTE: Coil may require metal spacer or shield between furnace and
coil. See coil install requirements (Table 6).
Fig. 11 – Example of Field Drain Attachment
Table 5 – Condensate Trap Configurations
Part
Installation Configuration
Horizontal Upflow
Upflow
Offset
Required Required Required
Not
Required
Required Required
Not
Required
Required Required
Not
Required
Not
Required
Required
(accessory kit
purchased
separately)
To Next Page
Loading...
