38
A13254C
• Plug the micro SD card into the bottom of the Infinity System Control and click on the
UPDATE SOFTWARE USING MICRO SD CARD.
• Press Yes to continue with the software upgrade. The upload and installation will take several
minutes.
• When the software upgrade is complete, a “successful” message will appear. Click DONE.
• The Infinity System Control will perform a restart after the DONE button is pressed. Once
the Infinity System Control has successfully restarted, the micro SD card may be removed.
• This completes the software upgrade process.
13.5. Updating Software Using Wi-Fi®
When software updates are available, this reminder message will be displayed on the home
screen.
To Next Page
Loading...
