Carrier Aero 39MN Series - Assemble Strainer and Trap Assembly and Valve Assembly (Fig. 88-91)

123
ASSEMBLE STRAINER AND TRAP ASSEMBLY AND
VALVE ASSEMBLY (FIG. 88-91)
Strainer and trap assemblies are sold as separate items through
your local Carel representative (shipped unassembled). Figures
88-91 each show a detailed list of components in those kits.
Table 32 lists Carel’s available inlet trap strainer kits.
Alternatively, strainers and traps from any manufacturer may be
used with the Carel humidifier. In this case, the trap size is based
on the condensate connection size leaving the humidifier. Figures
88-91 can then be used as a guide to purchase the remainder of the
components locally.
Fig. 88 — Examples of Pressurized Steam Systems
Fig. 89 — Carel Strainer Part Number Nomenclature
Fig. 90 — Strainer Assembly Components
Table 32 — Carel Inlet Trap Strainer Kits
SAKT x x xx x 0
1234
5
6
LEGEND
1 - ID prefix
2 - Material: F = Iron
S = SS
3 - Type: S = Condensate separator
T = Trap and strainer assembly
4 - Size: 15 = DN 15 flange
20 = DN 20 flange
25 = DN 25 flange
32 = DN 32 flange
40 = DN 40 flange
44 = 1-in. pipe thread
50 = DN 50 flange
65 = DN 65 flange
84 = 2-in. pipe thread
5 - Region: U = North America
O = Other
6 - Not used
1
2
3
5
6
7
8
2
2
4
ITEM DESCRIPTION SAK*T44*0 SAK*T84*0
1 Y-type strainer 1 (1 in.) 1 (2 in.)
2 Nipple M-M (size)
2 (
3
/
4
in. x 6 in.) 2 (
3
/
4
in. x 6 in.)
1 (1 in. x 3 in.) 1 (2 in. x 3 in.)
1 (1 in. x 6 in.) 1 (2 in. x 6 in.)
3 Elbow F-F (size) 1 (1 in.) 1 (2 in.)
4 Tee F-F-F (size) 1 (1 in.) 1 (2 in.)
5 Bushing F-M (size) 1 (
3
/
4
in. x 1 in.) 1 (
3
/
4
in. x 2 in.)
6 Union F-F (size) 1 (
3
/
4
in. x
3
/
4
in.) 1 (
3
/
4
in. x
3
/
4
in.)
7 F & T trap 1 (
3
/
4
in.) 1 (
3
/
4
in.)
8 Elbow F-M (size) 1 (
3
/
4
in.) 1 (
3
/
4
in.)
SIZE
MATERIAL, TYPE, REGION CODE
****FT**O* ****FT**U* ****ST**U*
SAKT**15*0 Flange DN 15 Not available Not available
SAKT**20*0 Flange DN 20 Not available Not available
SAKT**25*0 Flange DN 25 Not available Not available
SAKT**32*0 Flange DN 32 Not available Not available
SAKT**40*0 Flange DN 40 Not available Not available
SAKT**44*0 Not available 1 in. NPT female 1 in. NPT female
SAKT**50*0 Flange DN 50 Not available Not avail
able
SAKT**65*0 F
lange DN 65 Not available Not available
SAKT**84*0 Not available 2 in. NPT female 2 in. NPT female