Carrier AquaEdge 19XR series - EXAMPLE 7 - ISM_STAT DISPLAY SCREEN; EXAMPLE 8 - ICVCPSWD DISPLAY SCREEN

33
18.25 in.
(463.6 mm)
21.25 in.
(539.8 mm)
7 in.
(177.8 mm)
10 in.
(254 mm)
1.5 in.
(38.1 mm)
1.5 in.
(38.1 mm)
7/8-9UNC-4 HOLES FOR
JACKING SCREWS
25 in.
(635 mm)
28 in.
(711.2 mm)
14 in.
(355.6 mm)
17 in.
(431.8 mm)
1.5 in.
(38.1 mm)
1.5 in.
(38.1 mm)
7/8-9UNC-2B HOLES FOR
JACKING SCREWS
Fig. 13 — Accessory Isolation
LEGEND
NOTES:
1. Dimensions in ( ) are in millimeters.
2. Accessory (Carrier supplied, field installed) soleplate package includes 4 soleplates, 16 jacking screws and leveling pads.
3. Jacking screws to be removed after grout has set.
4. Thickness of grout will vary, depending on the amount necessary to level chiller. Use only pre-mixed non-shrinking grout, Ceilcote 748
or Chemrex Embeco 636 Plus Grout, 1½ in. (38.1 mm) to 2¼ in. (57.2 mm) thick.
HRS — Hot Rolled Steel
VIEW X-X
ACCESSORY SOLEPLATE DETAIL
a19-1110tf
a19-2002
a19-2003
SOLEPLATE DIMENSIONS
HEAT EXCHANGER FRAME SIZE
1 THROUGH 6
SOLEPLATE DIMENSIONS
HEAT EXCHANGER FRAME SIZE
7 AND 8
Fig. 14 — 19XR Accessory Spring Isolation (Shown with Accessory Soleplates)
NOTE: The accessory spring isolators are supplied by Carrier for installation in the field.
a19-1521tf