127
Table 20 — 19XR,XRV Compressor Weights
*Transmission weight does not include rotor, shaft, and gear.
†For two-stage compressors (Frame E) there are two impellers.
Weight listed is for each one.
NOTE: The weights indicated do not include motor, stator, rotor, low
speed shaft, motor case, motor end cover, or any other related com-
ponents. See Tables 21A-21E.
Table 21A — 19XR,XRV Compressor and Motor Weights*— Standard and High-Efficiency Motors —
Compressor Frame Size 2†
*Total compressor weight is the sum of the compressor aerody-
namic components (compressor weight column), stator, rotor, and
end bell cover weights.
†See Fig. 1 on page 6.
**Compressor aerodynamic component weight only, motor weight
not included. Applicable to standard compressors only. For high lift
compressors, contact Carrier Chiller Marketing for weights.
††Stator weight includes the stator and shell.
COMPONENT
FRAME 2
COMPRESSOR
WEIGHT
FRAME 3
COMPRESSOR
WEIGHT
FRAME 4
COMPRESSOR
WEIGHT
(WITHOUT
SPLIT
RING
DIFFUSER)
FRAME 4
COMPRESSOR
WEIGHT
(WITH SPLIT
RING
DIFFUSER)
FRAME 5
COMPRESSOR
WEIGHT
FRAME E
COMPRESSOR
WEIGHT
LB KG LB KG LB KG LB KG LB KG LB KG
SUCTION ELBOW 116 53 185 84 239 108 239 108 407 185 645 293
DISCHARGE ELBOW 100 45 125 57 157 71 157 71 325 147 290 132
TRANSMISSION* 320 145 400 181 656 298 656 298 1000 454 961 436
SUCTION HOUSING 370 168 400 181 585 265 810 367 1200 544 531 241
IMPELLER SHROUD 35 16 79 36 126 57 200 91 500 227 N/A N/A
COMPRESSOR BASE 1260 572 1565 710 1589 721 2020 916 3700 1678 2491 1130
DIFFUSER 35 16 67 30 130 59 130 59 350 159 N/A N/A
OIL PUMP 125 57 150 68 150 68 150 68 185 84 125 57
HIGH SPEED SHAFT
ASSEMBLY
15 7 12 5 30 14 30 14 65 29 94 43
IMPELLER† 52841571575023
10
(avg)
5
(avg)
INTAKE WALL —————————— 8940
DISCHARGE WALL —————————— 8539
DIAPHRAGM —————————— 8739
MISCELLANEOUS
(Incl. Low Speed Gear)
135 61 135 61 144 65 200 91 235 107 390 177
TOTAL COMPRESSOR
WEIGHT
(Less Motor and Elbows)
2300 1043 2816 1277 3425 1553 4211 1910 7285 3304 4873 2212
MOTOR
CODE
ENGLISH SI
COMPRESSOR
WEIGHT**
(LB)
60 HZ 50 HZ
END BELL
COVER
WEIGHT
(LB)
COMPRESSOR
WEIGHT**
(KG)
60 HZ 50 HZ
END
BELL
COVER
WEIGHT
(KG)
STATOR
WEIGHT
††
(LB)
ROTOR
WEIGHT
(LB)
STATOR
WEIGHT
††
(LB)
ROTOR
WEIGHT
(LB)
STATOR
WEIGHT
††
(KG)
ROTOR
WEIGHT
(KG)
STATOR
WEIGHT
††
(KG)
ROTOR
WEIGHT
(KG)
STANDARD-EFFICIENCY MOTORS / LOW VOLTAGE (200-575 V)
BDS 2300 900 190 915 205 185 1043 408 86 415 93 84
BES 2300 915 200 965 220 185 1043 415 91 438 100 84
BFS 2300 975 215 1000 230 185 1043 442 98 454 104 84
BGS 2300 1000 230 1060 250 185 1043 454 104 481 113 84
BHS 2300 1030 240 1105 265 185 1043 467 109 501 120 84
BJS 2300 1105 265 — — 185 1043 501 120 — — 84
HIGH-EFFICIENCY MOTORS / LOW VOLTAGE (200-575 V)
BDH 2300 1030 240 1030 240 185 1043 467 109 467 109 84
BEH 2300 1070 250 1070 250 185 1043 485 113 485 113 84
BFH 2300 1120 265 1120 265 185 1043 508 120 508 120 84
BGH 2300 1175 290 1175 290 185 1043 533 132 533 132 84
BHH 2300 1175 290 1175 290 185 1043 533 132 533 132 84
BJH 2300 1175 290 — — 185 1043 533 132 — — 84
JBH 2300 1003 226 1063 248 185 1043 455 103 482 112 84
JCH 2300 1063 248 1113 263 185 1043 482 112 505 119 84
JDH 2300 1113 263 1149 278 185 1043 505 119 521 126 84
JEH 2300 1149 278 1196 295 185 1043 521 126 542 134 84
JFH 2300 1196 295 — — 185 1043 542 134 — — 84