Carrier AquaEdge 23XRV - General Interface Features

12
General Interface Features
ICONS
Table 6 shows general interface icons.
Table 6 — Interface Icons
SCREENS
The Human Machine Interface includes the following screens:
• Home screen, which displays the main parameters
• Menu screens for navigation
• Data/configuration screens, which list the parameters by type
• Operating mode selection screen
• Password entry and language selection screen
• Parameter modification screen
• Time schedule screen
If the interface is not actively used, it goes into screen-saver mode
and displays a black screen. However, the control is always active
and the unit operating mode remains unchanged. When the user
presses the black screen, the Home screen is displayed.
System Overview (Home) Screen
Figure 10 shows the system overview screen. Press a component
image to see current status. For details, see Status Display Screens
on page 15.
Fig. 10 — System Overview (Home) Screen
ICON MEANING
Green: Indicates unit is running
Gray: Indicates unit is off
Home
Main menu
Indicates user is logged off
Indicates user is logged in
Gray: Indicates no alarm or alert is active
Red: Indicates alarm or alert
Back
Previous and next screen
3
4
5
6
7
2
1
8
11
9
10
14
17
13
15
16
12
1 — Home Screen Access Button
2 — Back Button
3 — Main Menu Access Button
4 — Globe Button
5 — User Login Screen Access Button
6 — Unit Start/Stop Access Button
7 — Alarm Menu Access Button
8 —VFDStatus
9 — Motor Load Current Percentage
10 — Oil Sump Temperature and Pressure
11 — Unit Diagnostics Access Button
12 — Condenser Discharge Temperature and Pressure
13 — Condenser Saturated Pressure and Temperature
14 — Setpoint Temperature
15 — Condenser Water Inlet and Outlet Temperature
16 — Evaporator Water Inlet and Outlet Temperature
17 — Lubrication Status
3
4
5
6
7
1
13
8
17
11
9
16
15
12
10
14
2
1 — Home Screen Access Button
2 — Back Button
3 — Main Menu Access Button
4 — Globe Button
5 — User Login Screen Access Button
6 — Unit Start/Stop Access Button
7 — Alarm Menu Access Button
8 —VFDStatus
9 — Motor Load Current Percentage
10 — Oil Sump Temperature and Pressure
11 — Unit Diagnostics Access Button
12 — Condenser Discharge Temperature and Pressure
13 — Condenser Saturated Pressure and Temperature
14 — Setpoint Temperature
15 — Condenser Water Inlet and Outlet Temperature
16 — Evaporator Water Inlet and Outlet Temperature
17 — Lubrication Status