Carrier AquaForce 30XB series - 30 XB-1000, 30 XBP-850 to 900, 30 XB-750 to 850 with Option 254;255; 30 XBP-1000, 30 XB-900 Option 254;255, 30 XB-1000 with Options 50 (Heat Recovery) & 118 (Free Cooling)

12
3.5 - 30XB-1000, 30XBP-850 to 900, 30XB-750 to 850 with option 254/255
POWER AND CONTROL ELECTRICAL BOX
8380 HT
2253 HT
1500
1500
1500
2200
2297 HT
1
1
1
2
1
3.6 - 30XBP-1000, 30XB-900 option 254/255, 30XB-1000 with options 50 (heat recovery) & 118 (free cooling)
POWER AND CONTROL ELECTRICAL BOX
9574 HT
2253 HT
1500
1500
1500
2200
2297 HT
1
1
1
2
1
Legend
NOTES:
- Drawings are not contractually binding.
- Before designing an installation, consult the certied
dimensional drawings, available on request.
- For the positioning of the xing points, weight distribution
and centre of gravity coordinates please refer to the
dimensional drawings.
- If the installation includes several units or if this (these)
is (are) close to walls, please refer to chapters 3.12 -
“Multiple chiller installation” and 3.13 - “Distance to the
wall” of this document to determine the space required.
All dimensions are given in mm.
a
Required clearances for maintenance (see note)
b
Recommended space for evaporator tube removal
Water inlet for standard unit
For options 5, 6, 100A, 100C, 107 refer to the certied drawing.
Water inlet for standard unit
For options 5, 6, 100A, 100C, 107 refer to the certied drawing.
Air outlet – do not obstruct
Power supply and control connection
3 - DIMENSIONS, CLEARANCES