Carrier AquaForce 30XV140 - Appendix H - Touch Pilot Web and Network Interface Parameters

164
APPENDIX H — TOUCH PILOT
™
WEB AND NETWORK INTERFACE PARAMETERS (cont)
SYSTEM SETTINGS — The System menu provides infor-
mation regarding the installed software and allows system set-
tings configuration. To access the menu, press the System field
in the Setup Menu. The System screen opens. See Fig. J.
DISPLAY SETTINGS — The Display menu allows users to
modify a set of display parameters such as contrast, backlight
timeout, and rotation. To access the menu, press the Display
field in the Setup Menu. The Display screen opens. See Fig. K.
Fig. H — Edit Connection Menu
Fig. I — Startup Connection Menu
System
Info
1
Settings
2
Special
3
Log
4
FW download
5
Reboot
6
Setup
Fig. J — System Menu
LEGEND
1—System information
2—System settings such as buzzer, file search option, delay
during start-up, introduction screen
3—Special options settings: DO NOT MODIFY
4—Unit start-up history
5—Firmware update
6—Unit reboot
Fig. K — Display Menu
LEGEND
1—Contrast information
2—Backlight timeout: After the specified period the screen goes
blank
3—Screen rotation
4—Screen resolution
5—Automatic centering
6—Touch screen calibration
1
2
3
4
5
6