9
Since Setpoint Select (Fig. 6) is a forcible point (the op-
erator is able to manually override the auto function), the
Force Variable screen will be displayed. See Fig. 8. The
Force Variable screen provides the option to override the
current operation of the unit.
Enter the forced value, then press to set the forced
point or to remove it (return to Auto).
GENERAL CONFIGURATION TABLE — This table con-
tains configuration settings for the unit. Select Main Menu
Configuration Menu General Configuration to access the ta-
ble (Fig. 9).
Press the field corresponding to the parameter to be modi-
fied and make the necessary changes. When all necessary
changes have been made, press the Save button to confirm
or the Cancel button to cancel changes. For a complete list
of general parameters, see Appendix A.
TRENDINGS SCREEN — The Trendings screen allows for
easy monitoring of parameters selected by the user. To access
the Trendings screen, select Trendings on the Main Menu.
See Fig. 10.
Select the parameters to be displayed by selecting the box to
the left of the parameter name, then press save. Press the up/
down page buttons to see the graph showing the perfor-
mance of the unit during a selected period of time. See Fig. 11.
Use the following buttons to adjust the Trendings display:
MENU ARCHITECTURE — See Fig. 12-14 for Touch Pi-
lot™ menu structure. The options displayed depend on the us-
er’s access level as shown in the figures. The user can navigate
through the Touch Pilot display screens by selecting the but-
tons that appear on the screen. When a button is selected, either
a submenu or a list of parameters and values will be shown.
If the list of point names and values are shown, the top line
of the display is the table name. Selecting an item will cause a
Point Data dialog box to appear. For a complete list of tables
and points with display names and CCN point names, see Ap-
pendix A.
Fig. 7 — Data Entry Screen
a30-5909
Fig. 8 — Force Variable Screen
Fig. 9 — General Configuration, Page 1
LEGEND
1— Save
2— Cancel
3— Previous page
4— Next page
Press to adjust time and date settings for the dis-
play. See Fig. 11. Select the time/date boxes and
use graphic keyboard to modify time/date; then
select the to save your entries.
Navigate across the time line.
Go to beginning or end of selected period.
Zoom in to magnify the view.
Zoom out to expand the viewed area.
Refresh (reload) data.
Fig. 10 — Trendings Screen, Page 1
Fig. 11 — Trendings Screen, Page 2
To Next Page
Loading...
