Carrier AquaSnap 30AWH-R - 2.7. Button lock settings; 3. Configuration

13
2.7. Buttonlocksettings
Used to lock the button of wired controller in case of touching by mistake; double press the “settings” button to unlock.
j Press the “setting” button to go to item 9: wired controller button lock.
k Press the “up” or “down” button to set the value (0-unlock; 1-lock)
l Next, press “conrm” button to conrm and exit user setting or you can also press “settings” button
togotonextitem.(Refertotheuserparametercongurationforallparametersettings)
English
2. User operation