36 Installation and Programming Guide
The menu bar is located along the bottom of the app. Touch the Zones icon (last icon with a
dot and wireless signals) to view zone status.
• Touch Bypass to ignore a zone or touch it again to restore it to normal operation.
• Touch Chime to add or remove a zone from the Chime feature.
• Touch Notify to receive push notifications when there is activity from that zone.
** Touch the Camera icon to view cameras connected to your system.
• Live snapshots from each camera will be shown. Touch the snapshot to open the
live stream in full screen. Rotate your device to make the image bigger. Touch the
screen then Back to return to the Camera screen.
• Touch the Play button under each camera to view the last recorded clip by that
camera. Touch the Share button to save or forward the clip.
• Touch the Record button to request that camera record a short clip which can be
retrieved later.
To Next Page
Loading...
