Carrier Aritech Reliance XR Pro - Page 97

Installation and Programming Guide 97
Programming Sequence
Instructions
1. Go to Areas.
2. Select an Area Number.
3. Enter a descriptive name.
4. Select the Options you want to enable for this Area. Area 2 and above have “Use Area 1
Options” ticked to allow faster programming of your system. Untick this box if you want
to customize options for Area 2 and above.
18. Channel Groups
6. Communicator
- General Options
- IP Configuration
- Cellular Configuration
- Username
- Password
- APN
- Remote Access
- System Event
Reporting
5. Channels
18. Channel Groups
6. Communicator
17. Event Lists
4. Areas
- Entry-Exit Times
- Area Options
- Area Timers
- Area Reporting
12. Area Groups
7. Schedule
18. Channel Groups