EasyManua.ls Logo

Carrier Comfort 59SC5B060E17-14 - FEATURES AND BENEFITS

Carrier Comfort 59SC5B060E17-14
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59SC5B: Product Data
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
2
FEATURES AND BENEFITS
HYBRID HEADual Fuel System - This system can provide more
control over your monthly energy bills by automatically selecting the
most economical method of heating. With HYBRID HEAT components,
our system automatically switches between the gas furnace and the
electric heat pump as outside temperatures change to maintain greater
efficiency and comfort than with any traditional single-source heating
system. The heat pump also delivers high-efficiency cooling in the
summer.
Power Heat™ Igniter - Carrier’s unique SiN igniter is not only
physically robust but it is also electrically robust. It is capable of running
at line voltage and does not require complex voltage regulators as do
other brands. This unique feature further enhances the gas furnace
reliability and continues Carrier’s tradition of technology leadership and
innovation in providing a reliable and durable product.
Comfort™ ECM Blower Motor - This basic ECM, or electronically
commutated motor, can provide an efficiency enhancement for select
Carrier air conditioner or heat pump systems. It uses less electrical
power than its PSC counterpart and has 5 speeds.
Reliable Heat Exchanger Design - The aluminized steel, clam shell
primary heat exchanger has a crimped, no-weld seam create an efficient,
robust design for this essential component.
The condensing heat exchanger, a stainless steel fin and tube design, is
positioned in the furnace to extract additional heat. Stainless steel
coupling box componentry between heat exchangers has exceptional
corrosion resistance in both natural gas and propane applications.
Media Filter Cabinet - Enhanced indoor air quality in the home is made
easier with our media filter cabinet-accessory (purchased separately).
When installed as a part of the system, this cabinet allows for easy and
convenient addition of a Carrier high efficiency air filter.
4-Way Multipoise Design - One model for all applications – there is no
need to stock special downflow or horizontal models when one unit will
do it all.
Direct or Single-pipe Venting, or Optional Ventilated Combustion
Air - All sizes except the 26,000 BTUH model can be vented for direct
vent/two-pipe, ventilated combustion air, or single-pipe applications.
The 26,000 BTUH model can use the same 2-pipe venting system using
outside air for combustion, but is not considered direct-vent.
Sealed Combustion System - This furnace brings in combustion air
from outside the furnace, which results in especially quiet operation. By
sealing the entire combustion vestibule, the entire furnace can be made
quieter, not just the burners.
Insulated Casing - Foil-faced insulation in the heat exchanger section of
the casing minimizes heat loss.
Monoport Burners - The burners are specially designed and finely
tuned for smooth, quiet combustion and economical operation.
Bottom Closure - Factory-installed for side return; easily removable for
bottom return. The multi-use bottom closure can also serve for roll-out
protection in horizontal applications, and act as the bottom closure for
the optional return air base accessory.
Blower Access Panel Switch - Automatically shuts off 115-v power to
furnace whenever blower access panel is opened.
Quality Registration - Our furnaces are engineered and manufactured
under a quality management system registered to ISO 9001.
FURNACE
CASING
DIMENSIONS (IN.)
RATED
HEATING
OUTPUT
*
BTUH
*. Capacity in accordance with DOE test procedures. Ratings are position dependent. See rating plate.
AFUE
ENERGY
STAR
®
HEATING AIRFLOW
COOLING
CFM @
0.5 ESP
(in. W.C.)
MOTOR
HP
H D W
UPFLOW/
HORIZONTAL
DOWNFLOW
HEATING
CFM
†. Heating CFM at factory default blower motor heating tap settings
ESP - External Static Pressure
HEATING
ESP
(in. W.C.)
59SC5B026E14--10 35 29.50 14.20 25,000 96.0% 95.0% YES 605 0.10 895 1/3
59SC5B040E14--10 35 29.50 14.20 39,000 96.0% 95.0% YES 695 0.10 950 1/2
59SC5B040E17--12 35 29.50 17.50 39,000 96.5% 95.0% YES 650 0.10 1010 1/2
59SC5B060E14--12 35 29.50 14.20 58,000 95.0% 95.0% YES 930 0.12 1120 1/2
59SC5B060E17--14 35 29.50 17.50 58,000 96.5% 95.0% YES 1010 0.12 1330 3/4
59SC5B080E17--16 35 29.50 17.50 78,000 96.5% 95.0% YES 1325 0.12 1665 3/4
59SC5B080E21--20 35 29.50 21.00 78,000 96.5% 95.0% YES 1330 0.12 1855 1
59SC5B100E21--20 35 29.50 21.00 97,000 96.3% 95.0% YES 1730 0.15 2125 1
59SC5B100E21--22 35 29.50 21.00 97,000 96.3% 95.0% YES 1785 0.15 2065 1
59SC5B120E24--22 35 29.50 24.00 116,000 96.1% 95.0% YES 2020 0.20 2105 1
59SC5B140E24--22 35 29.50 24.00 135,000 95.0% 95.0% YES 2130 0.20 2310 1

Related product manuals