8 8
This thermostat communicates wirelessly with a communication network. It
automatically obtains the current time and date from the communication
network.
In the event of loss of network communication, you can manually set the
time and date by following the instructions below. If you notice that the time is
not adjusted for daylight saving time you can adjust the hour at any time by
following Steps 1,2, and 3 below.
1. Open the door.
2. Press the set button on the left. The screen will show the word clock on
the left of the display and the time will be shown on the bottom.
3. To set the hour, press the soft button below the hour, and then press
the up or down button to adjust the value.
4. To set the minutes, press the soft button below the minutes, and then
press the up or down button to adjust the value.
5. To set the date, press the set button until the screen displays the word
calendar and the date is shown on the bottom of the screen.
Setting time and date
To Next Page
Loading...
