Carrier ComfortVu Plus TBPL-H - Page 20

ComfortVu™ BACnet Thermostat Plus Model TBPL-H (Line voltage)Carrier Proprietary and Confidential CARRIER CORPORATION ©2020
Installation and Operation Guide All rights reserved
16
Exit the programming procedure
At any time during the programming procedure, press the button to exit and return to normal display. Any changed
values will be saved.
Adjusting the time and day of the week
1. Press and hold the button. The word “Clock” will appear on display, and the HOURS will
flash.
Hours
2. Use the ▲or ▼buttons to adjust the hours.
Minutes
3. Press the button again. The MINUTES will flash.
4. Use the ▲or ▼buttons to adjust the hours.
Days
5. Press the button again. The DAYS will flash.
6. Use the ▲or ▼buttons to select the day.
7. If Technician Setting P107 is not set to “00” (program is enabled), press the
button to
enter programming procedure. Otherwise, press the
button to return to normal display.
Adjusting “EU type” daily programs
Start time
1. Press the button. The programmed weekday(s), “P1” indicating the first program event
of the day and the word “Start” will appear on display. The HOURS will flash.
2. Use the ▲or ▼buttons to adjust the start time hours of the first event.
3. Press the
button again. The MINUTES will flash.
4. Use the ▲or ▼buttons to adjust the start time minutes of the first event.