Carrier ComfortVu Plus TBPL-H - Page 21

ComfortVu™ BACnet Thermostat Plus Model TBPL-H (Line voltage)Carrier Proprietary and Confidential CARRIER CORPORATION ©2020
Installation and Operation Guide All rights reserved
17
Stop time
5. Press the button again. The word “Stop” will appear on display, and the HOURS will
flash.
6. Use the ▲or ▼buttons to adjust the stop time hours of the first event.
7. Press the
button again. The MINUTES will flash.
8. Use the ▲or ▼buttons to adjust the stop time minutes of the first event.
•
Follow the steps above for the other schedule events of the same daily period (P2 for two events per day, or
P2, P3, and P4 for four events per day).
•
Follow the steps above for all daily periods.
Adjusting “US type” daily programs
Start time
1. Press the button. The programmed weekday(s), “P1” indicating the first program event
of the day and the word “Start” will appear on display. The HOURS will flash.
2. Use the ▲or ▼buttons to adjust the start time hours of the first event.
3. Press the
button again. The MINUTES will flash.
4. Use the ▲or ▼buttons to adjust the start time minutes of the first event.
System mode
5. Press the button again. The selected system mode for the current programmed event
will appear on display.
6. Use the ▲or ▼buttons to select the mode (default Auto mode).
Fan speed
7. Press the button again. The selected fan speed for the current programmed event will
appear on display.
8. Use the ▲or ▼buttons to select the fan speed (default Auto speed).