ComfortVu™ BACnet Thermostat Plus Model TBPL-H (Line voltage)Carrier Proprietary and Confidential CARRIER CORPORATION ©2020
Installation and Operation Guide All rights reserved
18
9. Press the button again. The setpoint will flash.
Note: If the thermostat is configured to have two setpoints, first adjust the setpoint for cooling
and then the setpoint for heating.
10. Use the ▲or ▼ buttons to adjust the setpoint of the first event.
•
Follow the steps above for the other schedule events of the same daily period (P2 for two events per day, or
P2, P3 and P4 for four events per day).
•
Follow the steps above for all daily periods.
To Next Page
Loading...
