Carrier ComfortVu TB-24-HM - Page 61

P192 – Temperature setpoint for re-heat in unoccupied mode
Range: 10...30ºC / 50...86ºF
Default: 15ºC / 59ºF
P194 – Humidity differential band
Range: 0...10 %RH
Default: 5%RH
P195 – Humidity sensor reading offset
Range: -9…+9 %RH
Default: 0 %RH
P193 – Display switching time (between temperature and humidity)
Range: 0...11 seconds
Default: 5 seconds
Setpoint for reheat
in unocc. mode
Display switching
time Hum./Temp.
Humidity differential
band
Humidity
offset
P189 – Dehumidification cycle in unoccupied mode
Range: 0...600 minutes
Default: 20 minutes
P190 – Dehumidification break time in unoccupied mode
Range: 0...900 minutes
Default: 40 minutes
Dehumidification
cycle in unocc. mode
Dehumidification
break in unocc. mode
- 61 -
Technician Settings (cont.)