Carrier ComfortVu TB-24-HM - Technician Settings

Press the [On/Off] button or wait 60 seconds to return to normal display.
P198 – Not in use
Communication
protocol indication
P196 – Dead zone between humidification and dehumidification
Range: 0...100 %RH
Default: 0 %RH
P197 – Humidity setpoint
Range: 20...100 %RH
Default: 45 %RH
Dead zone
Hum./Dehum.
Humidity
setpoint
P200 – Restore defaults
- Press the [+] button. The display will change from “00” to “01”.
- Press the [On/Off] button to restore default settings.
- The thermostat will turn Off.
Dead zone
Hum./Dehum.
- 62 -
Technician Settings (cont.)