Carrier DHMSHAQ09XA1 - Page 40

40
DISASSEMBLY INSTRUCTIONS (CONT)
3 Evaporator How to remove the
evaporator.
1) After removing
the front panel
assembly and
electrical parts
(sections 1 and 2),
remove the pipe holder
at the rear side of the
unit.
2) Remove the two
screws on the
evaporator at the base
bearing side.
3) Remove the two
screws on the
evaporator at the fixed
plates and then lift the
evaporator assembly.
Two screws at the base bearing side
Two
screws at
the fixed
plates