-١٢-
OPERATING UNIT THROUGH REMOTE CONTROL (Cont.)
6.7 AIR HORIZONTAL Function
1. Press AIR HORIZONTAL button to activate the air flow
direction left / right automatically.
a- When press AIR HORIZONTAL button once and quickly,
the air flow direction setting feature of the louver is activated.
The moving angle of the louver is 6° for each press.
Keep pressing AIR HORIZONTAL button to move
the louver to the desired position.
b- If press AIR HORIZONTAL button without releasing for 2
more seconds, the auto swing feature of the louver is activated.
The horizontal louver would swing (Left / Right) automatically.
Notes:
When the louvers swing or move to a position which would affect the cooling and heating
effect of the air conditioner, it would automatically change the swing / moving direction.
To Cancel AIR HORIZONTAL operation, press again on AIR HORIZONTAL button.
6.8 ECO Mode
The ECO operation can maintain the most comfortable
temperature and save energy.
1. Press ECO button for 2 Seconds to activate ECO mode.
• The led of ECO mode will light on
• The set temperature will be automatically increased by
1°C after 1 hour after the operation mode is selected.
• Then the set temperature will be automatically increased
by another 1°C after additional 1 hour.
• This new temperature will be maintained and the fan
speed will automatically change to low speed.
Notes:
When activating ECO mode in Auto mode,
the set temperature will not change over time.
To cancel ECO mode, press any other button.
1
1
To Next Page
Loading...
