6.8.3 Features
Vessel Name Text box allowing the event log to be saved under the vessel name
Receive Log button Clicking on the button will allow the programme to accept incoming data via the
communications port
Save Log button Save the contents of the text window as a text file
Comms port drop down box Select the communications port the download cable is connected to
Text window displays the data downloaded from the panel.
6.8.4 Operation
Plug the 9-way D type connector on the download cable, MT0021 into the PC RS232 communications
port or the USB to RS232 converter if required.
Connect the 5 pin DIN plug on the download cable to the socket SKT1 on the OMD Mk6 Main Processor
Board, 44782-K071-02, mounted on the panel door.
Run the Log Reader on the PC.
6.8.4.1 Downloading the event log
Select the correct PC communications port from the dropdown box; this can be found in the hardware
settings of the PC if not already known.
Select download event log from the Engineers menu on the panel, refer to the OMD Mk6 manual if
necessary.
Click the Receive Log button the button text will change to Stop Receive.
Initiate the download at the panel.
The event log will appear in the text window as it is downloading. A count down of the number of events
left to download is displayed on the panel. When the download is complete, click the Stop Download
button on the OMD Mk6 Log Reader.
The event log can be examined in the text window by scrolling up and down.
To Next Page
Loading...
