Carrier Infinity SYSTXCCICF01-B - 15 Heat Source (if Applicable); 16 Zone Names (if Applicable)

56
15. Heat Source (If Applicable)
With the Infinity System Control, you can select the desired heat source
of your system, if your system is equipped as a HYBRID HEAT®
System. Select the HEAT SOURCE icon from the menu screen.
A170239C
NOTE: Options available on this screen will correspond to the
equipment attached. Options may appear that are different than those
shown, below.
• The default is for the system to Control the heat source.
• To have only the furnace Control, select FURNACE ONLY.
• To have only the heat pump, select HEAT PUMP ONLY.
• To have only electric select ELECTRIC ONLY.
• When you have made the appropriate selection, touch SAVE.
16. Zone Names (If Applicable)
With the Infinity System Control, you have the ability to customize zone
names. Select the ZONE NAMES icon from the menu screen.