69
20.4. Price Settings
When the electric rate from the utility company meets or exceeds the
“ELECTRICAL RATE”, the heating and cooling set points will be
adjusted according to the absolute temperature or offset shown here. If
the set point at the time of the event is more favorable (uses less energy)
than what you have programmed, the Infinity System Control will use the
more favorable set point for the duration of the event. Unless otherwise
indicated, all settings temperatures will be shown in Fahrenheit degrees.
A14264
20.5. Demand Response
Demand response determines how the heating and cooling set points will
be adjusted during a demand response event with two choices - offsets or
absolute temperature. When offsets are selected, the heating and cooling
set points are adjusted by the number of degrees selected. When absolute
temperature is selected, the heating and cooling set points are adjusted to
heating and cooling temperatures.
To Next Page
Loading...
