Carrier Infinity SYSTXCCITC-01SI - Setup and Status Information (Dealer- - Provided Router)

84
A13242C
7.2 Setup and Status Information (Dealer--provided Router)
To establish the Wi--Fi
®
network connectivity to the Infinity System Control
through the Infinity System Wireless Access Point (TP--LINKR Device), connect
the WAN (BLUE port) connection of TP--LINK Wireless Access Point to the
home’s existing router LAN port using the provided Ethernet cable. The LAN ports
on the back of the TP--LINK Wireless Access Point should not be used for other
devices. The Infinity (TP--LINK) Wireless Access Point should only be used for
connection of the Infinity System Control(s) and is not intended to be used wired or
wirelessly with any other devices.
A150176C
S Select the WIRELESS from the menu screen
S Make sure the Wi --Fi network connection is enabled, by touching ENABLED.