OM-KSACN1401AAA-01 Specifications subject to change without notice. 45
After the wire controller resumes the factory parameter setting:
– The Lead/Lag parameter setting is restored to 10 hours, the highest and lowest
temperatures are not set. The temperature compensation for Follow Me function will be
reset to zero.
– COOL and HEAT/single COOL mode is restored to COOL and HEAT mode.
– Temperature range is restored to the factory setting.
– Remote receiving function is restored to be effective.
– The address of the two-control first-line controller is restored to the code switch.
To Next Page
Loading...
