SETTING UP THE THERMIDISTAT CONTROL
2
With the dehumidify
indicator (dhu) displayed,
press the UP or DOWN button to adjust
the dehumidify set point. Dehumidify
levels can be set from 50% to 90%. Or, to
turn dehumidification off, press the MODE
button until “OF” appears on the display.
(See suggested settings on page 26.)
3
Press the END button to exit.
Setting the “cool to dehumidify”
function
This setting allows a standard comfort
system to provide moderate dehumidi-
fication by running the air conditioner.
The function can also be used with
variable-speed equipment.
NOTE: While in the “cool to dehumidify”
mode, the indoor air temperature will not
drop more than 3° below the cooling set
point with a dehumidification demand.
10
To Next Page
Loading...
